Categories
Netool PRO 2 - Configure untagged VLAN id, Tagged VLANs, with IF/THEN, Deploy with auto queue, PCAP Capture
SKU: Leader-NHN-NETOOL-PRO-2
Netool PRO 2 - Configure untagged VLAN id, Tagged VLANs, with IF/THEN, Deploy with auto queue, PCAP Capture
SKU: Leader-NHN-NETOOL-PRO-2
In Stock
More From This Category
Netool PRO 2 - Configure untagged VLAN id, Tagged VLANs, with IF/THEN, Deploy with auto queue, PCAP Capture
- Supported system: iOS, iPadOS, Android
- Dimensions: 107.95 x 44.45 x 19.05 mm
- Weight: approx. 86 g
- Battery type: Polymer Lithium-ion Cell
- Battery size: 2500 mah 9.25 Wh
- Battery Voltage: 3.7V
- Battery run time: approx. 12 hours
- USB-C (Lighting Bolt): Charging port at 1.0 Amps
- USB-C (Arrows): Data port future use
- BLE 5.0: iOS, iPadOS, Android
- WiFi 2,4 GHz: iOS, iPadOS, Android
- Discovery protocols: LLDP, CDP, EAP, CDPv2, EDP, FDP, SONMP
- Tagged VLAN Ids: 802.1Q
- DHCP: IPv4, IPv6
- STP: Spanning tree via packet sniffing
- LACP: Link Aggregation Control Protocol
- ICMP (Ping): From main app menu
- HTTP/HTTPS: To any custom URL
- Trace Route: To any custom address
- 802.1X: Port authentication
- Certifications: FCC; CE, RoHS, C-Tick, A-Tick
- Public IP: Detect external IP adress of the network
- Netool.io Cloud: Sync discovered data with netool.cloud
- Sharing: Share discovered data via multiple platforms
- Untagged VLAN: Configure untagged VLAN in switch ports with your netool.io Pro 2 with many different action modes like, queue then configure, auto configure or manually invoked.
- Tagged VLAN: Configure tagged VLANs in a switch port that your netool.io Pro 2 is plugged into with many different action modes like, queue then configure, auto configure or manually invoked.
- IF/THEN: Using your own custom syntax and configuration, you can build an IF/THEN statement that will run switch commands based on the response of the switch invoke this IF/THEN statement using many different action modes, queue then configure, auto configure or manually invoked.
- Supported system: iOS, iPadOS, Android
- Dimensions: 107,95 x 44,45 x 19,05 mm
- Weight: approx. 86 g
- Battery type: Polymer Lithium-ion Cell
- Battery size: 2500 mah 9,25 Wh
- Battery Voltage: 3,7V
- Battery run time: approx. 12 hours
- USB-C (Lighting Bolt): Charging port at 1,0 Amps
- USB-C (Arrows): Data port future use
- BLE 5.0: iOS, iPadOS, Android
- WiFi 2,4 GHz: iOS, iPadOS, Android
- Discovery protocols: LLDP, CDP, EAP, CDPv2, EDP, FDP, SONMP
- Tagged VLAN Ids: 802.1Q
- DHCP: IPv4, IPv6
- STP: Spanning tree via packet sniffing
- LACP: Link Aggregation Control Protocol
- ICMP (Ping): From main app menu
- HTTP/HTTPS: To any custom URL
- Trace Route: To any custom address
- 802.1X: Port authentication
- Certifications: FCC; CE, RoHS, C-Tick, A-Tick
- Public IP: Detect external IP adress of the network
- Netool.io Cloud: Sync discovered data with netool.cloud
- Sharing: Share discovered data via multiple platforms
- Untagged VLAN: Configure untagged VLAN in switch ports with your netool.io Pro 2 with many different action modes like, queue then configure, auto configure or manually invoked.
- Tagged VLAN: Configure tagged VLANs in a switch port that your netool.io Pro 2 is plugged into with many different action modes like, queue then configure, auto configure or manually invoked.
- IF/THEN: Using your own custom syntax and configuration, you can build an IF/THEN statement that will run switch commands based on the response of the switch invoke this IF/THEN statement using many different action modes, queue then configure, auto configure or manually invoked.
Be The First To Review This Product!
Help other flashtrend.co.nz users shop smarter by writing reviews for products you have purchased.